MC202 Motion Coordinator
The Trio MC202 is a compact DIN rail mounted motion controller based on Trio’s proven high performance 32 bit DSP technology. It has been designed to provide a compact, cost effective solution for OEM applications. The unit features two axes, the first of which can be configured either for either servo (with encoder feedback) or stepper (with step/direction outputs) control. The second axis may be either a reference encoder OR a stepper axis
The MC202 features Trio’s Multi-tasking BASIC language which allows true pre-emptive multi-tasking of up to 3 simultaneous processes. This allows parts of a complex application to be developed, tested and run independently, although the tasks can share data and motion control hardware.
Each axis may run moves using linear or circular interpolation, electronic cams and gearboxes. Support is provided for continuously rotating machinery and the inputs may be configured for accurate hardware registration.
The MC202 has 4 built in 24v inputs and 4 built-in bi-directional input/output channels. These may be used for system interaction or may be defined to be used by the controller for end of travel limits, datuming and feedhold functions if required. The MC202 can have up 256 external Input/Output channels and up to 32 analog input channels connected using DIN rail mounted I/O modules. These units connect to the built-in CAN channel of the MC202 The MC202 has a built in RS-232 port. In addition a further serial channel is available at TTL levels. External adapters are available to allow this serial port to be linked to a full-duplex RS-485 channel or a Trio membrane keypad on a fibre-optic link.
Features:
- Compact 93w x 45d x 100h
- Easy DIN rail mounting
- Multi-Tasking BASIC Programming
- MotionPerfect Application Development Software
- CAN Networking
- Individual Status LEDs
Mektron, Inc.
414 Elwood Avenue · Hawthorne, NY 10532 ·
Phone: (914) 747 - 0100 · Fax: (914) 747 - 0408
This page, and all contents, are Copyright ©2001 by Mektron , Inc.
This site has been created and maintained by The Webmaster General